Seagull Models Swift .40 Size Trainer ARF, SEA-138
The Seagull Swift 40 V2 Trainer was designed with the sports trainer flyer in mind. It is a high-wing aeroplane made from balsa and plywood that is easy to fly and quick to assemble.
Â
Features
- Covered in high-quality UltraCote
- Easy to fly
- Balsa and plywood construction
- Choice between nitro, gas or electric power
- Aluminium landing gear
- Photo-illustrated step-by-step assembly manual
Product Information
The airframe of the Seagull Swift 40 Trainer is conventionally built using balsa and plywood to make it stronger than the average Almost-Ready-To-Fly, yet the design allows the RC plane to be kept light. You will find that most of the work has been done for you already. The pushrods are pre-made to the correct lengths, the motor mount has been fitted and the hinges are pre-installed and pinned for security. Flying the SWIFT 40 is simply a joy.
You have the possibility as a rookie to change the landing gear for the different learning processes, it is really a plane designed for those who are just starting out in model aircraft.
What you need
GLOW POWER
- .46 size engine
- (4) Standard servos
- 300mm servo extension lead
- Transmitter and receiver
- Fuel tube
- Fuel filter
- Glow propeller
- Charger
- Charge Connector
- Glues
- Switch
- Flat battery
- Knife
ELECTRIC POWER
- Motor
- ESC
- Propeller
- LiPo Battery
- (3) Standard servos
- 300mm servo extension lead
- Transmitter and receiver
- Charger
- LiPo protection bag
- Glues
- Knife
Specs
- Experience level
- Beginner/Intermediate
- Wingspan
- 160 cm / 63 in
- Wing area
- 41.5 sq dm / 643.3 sq.in
- Overall length
- 116.4 cm / 45.8 in
- Flying weight
- 2.5-2.8 kg / 5.5-6.2 lb
- Power system
- Nitro 2-stroke 0.40-0.55 cu.in / 4 stroke 0.72-0.82 cu.in or electric equivalent
- Radio
- 4 channels
- Servos
- 4
- CG (Centre of Gravity)
- 65 mm back from the leading edge of the wing